• Rafinery2
  • Rafinery1
  • NDT
  • Tank
  • Boiler

ULTRASONIC TESTING

Scientific Principles

High frequency sound waves are sent into a material by use of a transducer. The sound waves travel through the material and are received by the same transducer or a second transducer. The amount of energy transmitted or received and the time the energy is received are analyzed to determine the presence of flaws. Changes in material thickness, and changes in material properties can also be measured.

Main Uses 

  • Used to locate surface and subsurface defects in many materials including metals, plastics, and wood.
  • Ultrasonic inspection is also used to measure the thickness of materials and otherwise characterize properties of material based on sound velocity and attenuation measurements.

Main Advantages

  • Depth of penetration for flaw detection or measurement is superior to other methods.
  • Only single sided access is required.
  • Provides distance information.
  • Minimum part preparation is required.
  • Method can be used for much more than just flaw detection.

Disadvantages

  • Surface must be accessible to probe and couplant.
  • Skill and training required is more extensive than other technique.
  • Surface finish and roughness can interfere with inspection.
  • Thin parts may be difficult to inspect

 

For training courses terms please visit www.sector-cert.com.mk